Enerwatt Battery Charger 6/12V 900mah Fully AutomaticTCE-EWC612-1
The ENERWATT Charger is designed for a hassle free storage of your battery. Find your batteries at full capacity next season. This charger is 100% automatic and safe and requires a minimum of supervision.
"Perfect for the storage of your motorcycle, snowmobile, personal watercraft, ATV, lawnmower, vintage car, etc."
Using the ENERWATT 612-900 is very simple, you only need to connect the clamps to your battery and plug it into an outlet. The ENERWATT 612-900 will stop charging the battery when the voltage is reached in order to avoid overload and it will start again when voltage lowers. Leave it plugged-in all the time until next season.
WHY RE-CHARGE A BATTERY DURING STORAGE?
The maintenance load is essential in prolonging the life of your batteries. If nothing is done, a battery will loose its charge little by little, around 0.5 to 1% every day. After a period of approximately 3 months, the battery is completely discharged. In such state, the battery might be damaged. It may freeze or sulphate. This phenomenon occurs when the electrons do not move fast enough in the battery, sulphate then glues to the plates and cannot be removed.
12V and 6V - 900 mAh Equipped with protection against reversed polarity. For conventional and sealed batteries. 3 LED lights indicating the state of charge of the battery. Interchangeable cable: eyelets or clamps (compatible with the ENERWATT EWC12-248)